View Cart | Checkout

Bilstein 5150 Series Shock Absorbers

Bilstein 5100 Shocks

NEW from the leader in gas pressure shock absorber technology ...

Using the knowledge gained from winning more off-road races than any other major shock manufacturer, Bilstein introduces the 5150 Series. The first production monotube high gas pressure, fixed CrossFlow reservoir shock absorber designed specifically for lifted and custom applications.

  • Race Inspired Fixed Crossflow Reservoir
  • Adjustable Shock Mount Allows Unlimited Reservoir Positioning
  • Advanced Design Split Valving
  • Huge 46mm Working Piston
  • Maintenance Free Design
  • Valving for Single or Multiple Shock Application
  • Platinum Powdercoat Finish
  • Available in 6.5" to 14" Travel

5150 Series Shocks

Below is a chart for the 5150 Crossflow Series that are sold by size, not application. Due to the variances of different modifications to a vehicle, or lift-suspension kits, it is your responsability to confirm that the shocks you purchase are dimensionally correct.

Note: Each shock has a 5/8 hourglass bushing at each end. All the shocks have an attached reservoir and a shaft diameter of 14 mm.

Bilstein has discontinued the 5150 series of offroad race shocks. For custom applications, please use the Bilstein 5125 offroad shocks or Bilstein 5165 remote reservoir offroad shocks.

SKU Travel Valving Extended Length Collapsed Length Price/Shock Order
E4-GV3-Z009A07 Bilstein 5150 Adaptor for Crossbar Mount 3-inch OPEN SQUARE END
411338 Bilstein 5150 Adaptor for Crossbar Mount 2 1/2-inch ROUND END
Bilstein 5150 Adaptor for Threaded End B4-BOA-0000228
RS1937 Shock Boot Red Long
2202G 98108G Bilstein Bushing 3/4 Urethane Eyelet
421120 Bilstein Bushing Loop Mounting

5150 Adaptors
5150 adaptors

The 5150 shock comes with a loop at each end preinstalled. But if you need a different type mount at one of the shock, Bilstein makes 3 adaptor mounts (you change off a loop end and then screw or press in the adaptor for a tight secure fit.). #192228 - This adaptor is for a threaded end. If you need to add a stud at one end of the shock, the 1922228 is what you want, this screws on. The #411338 adaptor is for a crossbar ("feet") mounting, you press this into the shock after taking. If you need to add a crossbar at one end of the shock, this adaptor has 2 bolt holes that are spaced 3-inches apart center to center. The #411337 is an adaptor for a crossbar ("feet") mounting you press in. If you need to add a crossbar at one end of the shock, this adaptor has 2 bolt holes that are spaced 2 1/2 -inches center to center apart. If you want a new boot for a 5150, order RS1937. (the boot is only available in RED).

"I've been racing and winning on Bilstein Shock Absorbers for 28 years. They're on every vehicle I drive, from my everyday Toyota Prerunner to the ProTrucks Stewart & Stewart builds."

-Ivan "The Ironman" Stewart.

Bilstein Truck

Bilstein Information Links
Who is Bilstein?
Truck Shocks
Automotive Shocks & Struts
Touring Class Shocks & Struts
Motorhome Shocks
Pro Suspension System
BTS Suspension System
Steering Stabilizer
Street Rods Shocks
5100 Series Truck Shocks
5125 Series Truck Shocks
5150 Series Truck Shocks
7100 Series Truck Shocks
9100 Series Truck Shocks

| Back | Buy | Bilstein Specials |

Search by Make | Airlift | Bilstein | KYB | Monroe | Rancho | Edelbrock | Home | About Us | Faq's | Site Map | Email Us | Privacy | Terms
275 Nosef Dr, Batesville, MS 38606

Master Card  Visa  American Express Discover  PayPal
All trademarks and registered trademarks are the property of their respective companies. © Copyright 2020
Designed by: Cruzan Concepts, Inc. || Developed by: DomaNet, Inc.